Your request has been submitted!
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Protects the pump, while offering a convenient tie down location for transport.
High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protects the pump by shutting the engine off when low oil is detected.
The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
|Bore and stroke||2.7" x 1.8"|
|Pump Type||Centrifugal, Self-priming|
|Volute||Rigid Mounted Cast Iron|
|Impeller||4 Vane Cast Iron|
|Mechanical Seal (Pump case / impeller)||Silicon Carbide/Silicon Carbide|
|Priming time||150 sec @16.4 ft.|
|Discharge capacity||290 gal/min|
|Suction port diameter||3" NPT|
|Discharge port diameter||3" NPT|
|Total head lift||85 ft.|
|Suction head lift||25 ft.|
|Maximum pressure||37 psi|
|Dimensions (LxWxH)||20.1"x 15.2" x 17.9"|
|Dry weight||57 lb.|
|Fuel Capacity||0.82 gal|
|Run Time @ Max Discharge||1.9 hr|
|Strainer Part #||78325-YG4-000|
|Residential Warranty||24 months|
|Commercial Warranty||12 months|